ISRO PREVIOUS YEAR PAPER WITH ANSWER
TECHNICIAN-B (FITTER) Held on: 02.06.2019
Maximum Marks : 320
1 . शीण चक्र के प्रसाधन का संदर्भ ............ से है।
Dressing of a grinding
wheel refers to
(a) चक्र के कर्तन कार्यविधि का पुन:स्थापन/Restoring the cutting action of the wheel
(b) चक्र के आकृतीयन/Shaping of the wheel
(c) चक्र को अक्ष के साथ संकेंद्री बनाने/Making the wheel
concentric with the axis
(d) चक्र को बदलने/Changing the wheel
2 . प्रवेधित छिद्र के द्वार पर एक बोल्ट शीर्ष के लिए चपटा तल बनाने की प्रक्रिया ........ है।
The process of producing a flat seat for a
bolt head at the opening of a drilled hole is
(a) प्रति
संछिद्रण/Counter boring
(c) छिद्रवर्धन/Reaming
(b) प्रति निम्मजी/Counter
sinking (d) बिंदु
मुखन/Spot facing
3
. आकार की अधिकतम और न्यूनतम सीमा के बीच के अंतर को ..... कहा जाता है।
Difference between the maximum and the minimum
limit of size is known as
(a) विचलन/Deviation
(c) क्षम/Fit
(b) सहायता/Tolerance (d)
व्यतिकरण/Interference
4 . 28 + 0.5 एम के रूप मेंअभिहित छिद्र के लिए सहायता ....है।
For a hole designated as
28 +0.5 mm, the tolerance is
(a) 0.5 एमएम/mm
(c) 28 एमएम/mm
(b)1 mm (d)28.5 mm
5 . एक होल आधारित प्रणाली में, होल 'H' के लिए निम्न विचलन ........ है।
In a hole basis system,
the lower deviation for the hole 'H' is
(a) 0 एमएम/mm (c)
1 एमएम/mm
(b) 0.1 एमएम/mm (d)
None of this
6
. वेल्ड की संलयन की गहराई को .....कहा जाता है |
The depth of fusion of a
weld is known as
(a) व्यापन/Penetration (c) संलयन/Fusion
(b) गलित कुंड/Molten pool (d) कर्षण/Drag
7 . पहली 10 प्राकृतिक संख्याओं का फल ....... ........ है।
Sum of first 10 natural numbers is
(a) 55 (b) 10
(c) 210 (d) 110
8. बेलनाकार बाह्य पृष्ठ पर एक उपकरण को दबाने से उत्पन्न चित्राम को कहा जाता है।
The operation of
producing patterns on cylindrical external surface by pressing a tool is known
as
(a) वेधन/Boring (c) नर्लन/Knurling
(b) बर्तन/Turning (d) टेपर वर्तन/Taper turning
9.मोटी रेती कर्तन फाइल की आकृति ............... है।
The shape of a rasp cut
file is
(a) त्रिकोणीय/Triangular (c) अर्ध गोल/Half round
(b) फ्लैट/Flat (d) गोल/Round
10. साक्षी निशान बनाने के लिए इस छिद्रित का प्रयोग किया जाता है।
This punch is used for
making witness marks
(a) 60° प्रिकछिद्रित/60° Prick Punch (c) केंद्र छिद्रित/Center Punch
(b) 30°प्रिकछिद्रित/30° Prick Punch (d) 90° केंद्र छिद्रित/90° Center Punch
11. 300 मिलीमीटर लंबाई के एक मानक लोहाकाट आरे में 375 दांत हैं। ब्लेड सेट का वर्गीकरण और प्रकार क्या है?
A standard hacksaw blade of 300 mm length has
375 teeth. What is the classification and type of set of the blade?
(a) मध्यम,तरंग सेट/Medium, Wave set (b) मध्यम, सांतरित सेट/Medium, Staggered set
(c) सूक्ष्म, सांतरित सेट/Fine, Staggered set (d) सूक्ष्म, तरंग सेट/Fine, Wave set
12. उच्च वेग इस्पाती प्रवेधन डी24 सेफॉस्फर ब्रांज की एक कला वस्तु को काटने के लिए वेग आढृढन (आरपीएम) का पता लगाएं। फॉस्फर ब्रांज के लिए आरएसएस का अधिकतम कर्तन वेग 35 मीटर
प्रति मिनट है।
Find out the speed
setting (rpm) for a high speed steel drill D24 to cut a work piece of phosphor
bronze. Maximum cutting speed with HSS for Phosphor Bronze is 35 m/min
(a) 400 (b)
200
(c) 1000 (d) 600
13. 60° बिंदु कोण के साथ अगर एक छेनी का नति कोण 39.5° है, तो अस्पर्शी कोण कितना होगा?
What is the clearance
angle if the angle of inclination of a chisel, with point angle 60°, is 39.5°?
(a) 15° (c) 20.5°
(b) 9.5° (d) तीनों से कोई भी नहीं/none of the three
14. बड़े व्यासों के बहुल छिद्रों के प्रवेधन के लिए एक प्रवेधन मशीन का चयन करें।
Choose a drilling machine for drilling multiple
holes of larger diameters
(a) सुग्राही बेंचप्रवेधन मशीन/Sensitive bench
drilling machine
(b) स्तंब प्रवेधन मशीन/Pillar drilling machine
(c) कॉलम प्रवेधन मशीन/Column drilling machine
(d) अरीय प्रवेधन मशीन/Radial drilling machine
15 . 100125 मिलीमीटर परास के मीटरी बाहरी सूक्ष्ममापी को एक छड़ का व्यास मापने के लिए प्रयुक्त किया जाता है। बैरल अंशांकन 16.5 दिखायाऔर बैरल आधार लाइन के अनुरूप अंगुलत्राण अंशांकन, 28 था। छड़ का व्यास कितना होगा?
A Metric Outside
micrometer of range 100-125 mm is used to measure the diameter of a rod. Barrel
graduation showed 16.5 and the thimble graduation in line with the barrel datum
line was 28. What is the diameter of the rod?
(a) 16.78 मिलीमीटर/mm
(b) 16.64 मिलीमीटर/mm
(c) 116.64 मिलीमीटर/mm
(d) 116.78 मिलीमीटर/mm
16. पिटवाँ लोहे में कार्बन की मात्रा... ............... है।
Carbon content in
wrought iron is
(a) 0.2-0.3% (b)
0.3-0.8%
(c) .02-0.03% (d) 0.1-0.2%
17. मृदुलता, उन्नत मशीनीयता, वर्धित तन्यता प्राप्त करने के लिए आंतरिक प्रतिबल से मुक्तिएवं कण-साइज को परिष्कृत करने हेतु इस्पात के ऊष्मा उपचार को ..... कहा जाता है।
The heat treatment of
steel to obtain softness, improved machinability, increased ductility, to
relieve internal stresses and to refine the grain size is called
(a) अनीलन/Annealing (c) नाइट्राइडीकरण/Nitriding
(b) पायन/Tempering (d) कठोरन/Hardening
18 . सामान्य ताप पर सादा कार्बन इस्पात में ............... होता है।
At room temperature,
plain carbon steel contains
(a) फेराइट और सिमेंटाइट/Ferrite and cementite
(b) फेराइट और पर्लाइट/Ferrite and pearlite
(c) पेर्लाइट और सिमेंटाइट/Pearlite and Cementite
(d) फेराइट, सिमेंटाइट और पे्लाइट /Ferrite, Cementite and
Pearlite
19. निम्नलिखित में से एक, लेथ का कार्य पकड़ उपकरण नहीं है।
One of the following is
not a work holding accessory of a lathe
(a) मुख पट्टिका/Face Plate (c) प्रग्राही पट्टिका/Catch Plate
(b) दंडक/Mandrel
(d) स्वकेंद्री चक/Self Centring Chuck
20. वर्तन के दौरान निम्नलिखित में कौन चिप ज्यामिति को नियंत्रित करता है?
Which of the following
controls the chip geometry while turning?
(a) उच्चावच कोण/Relief Angle (c) रेकन कोण/Rake Angle
(b) उपगमन कोण/Approach angle (d) अस्पर्शी कोण/Clearance angle
21. 30H7/g6 के रूप में अभिहित फिट ........ है |
A fit designated as
30H7/g6 is a
(a) अस्पर्शी फिट/Clearance fit (c) व्यतिकरण फिट/Interference fit
(b) Transition fit (d) Tolerance
22.अगर छिद्र का आकार 25 000+0.021 और कूपक आकार 25 +0022440035 है, तो न्यूनतम व्यतिकरण...है।
If the hole size is 25
+0,000/+0.021 & shaft size is 25 +0.022/+0.035 the minimum interference is
(a) 0.035 मिलीमीटर/mm (c) 0.021 मिलीमीटर/mm
(b) 0.001 मिलीमीटर/mm (d) 0.022 मिलीमीटर/mm
23.
गैस कर्तन प्रचालन में उत्पन्न कर्तन की चौड़ाई को ........ कहा जाता है।
The width of cut produced in gas cutting
operation is known as
(a) गर्तन/Gouging (b) केरफ/Kerf
(c) प्रवण/Bevel (d) कर्षण/Drag
24, वेल्डिंग परिणामित्र को में परिवर्तित करने के लिए प्रयुक्त किया जाता है।
A welding transformer is
used to convert the
(a) डी.सी. मुख्य सप्लाई को ए.सी. वेल्डिंग सप्लाई/D.C. main supply into
an A.C. welding supply
(b) ए.सी. मुख्य सप्लाई को डी.सी. वेल्डिंग सप्लाई/A.C. main supply into a D.C. welding supply
(c) ए.सी. मुख्य सप्लाई को ए.सी. वेल्डिंग सप्लाई/A.C. main supply into an A.C. welding supply
(d)डी.सी. मुख्य सप्लाई को डी.सी. वेल्डिंग सप्लाई/D.C. main supply to D.C
welding supply
25.फाइल का संकीर्ण एवं पतला भाग जिसे हत्थे के साथ जोड़ा जाता है, उसे ..... कहते हैं।
The narrow and thin part of the file which is
connected to the handle is known as
(a) टिप/Tip (b) बिंदु/Point
(c) टैंग/Tang (d) कोर/Edge
26.फाइल में निम्नलिखित भागों में से कौन सा भाग कठोरित एवं पायित नहीं हैं?
Which of the following
parts in file is not hardened and tempered?
(a) पाण्र्णि/Heel (c) टैंग/Tang
(b) को/Edge (d) पिंड/Body
27. निम्नलिखित में परोक्ष कोण मापन उपकरण का उदाहरण कौन-सा है?
Which of the following
is an example of indirect angle measuring tool?
(a) प्रवण प्रोट्रैक्टर/Bevel protractor (c) संयोजन सेट/Combination set
(b) प्रवण गैज/Bevel gauge
(d) चिन्ह टैबल/Marking table
28.तीन अनभिनत सिक्कों को उछाला जाता है। अधिकतम दो चित मिलने की संभावना कितनी है?
Three unbiased coins are
tossed. What is the probability of getting at most two heads?
(a) 3/4
(b) 1/4
(c) 3/8
(d) 7/8
29. सर्पिल खाँचा जो प्रवेधन की लंबाई तक जाए उसको .............कहा जाता है।
The spiral grooves which
run to the length of the drill are known as
(a) पिंड/Body
(d) टैंग/Tang
(c) फ्लूट/Flutes
(b) बिंदु/Point
30. निम्नलिखित में ........ वह कर्तन तेल है जो सूक्ष्म पोषण में उपारोध को रोकने के लिए प्रयुक्त किया जाता है।
Which of the following cutting oil is used to
prevent clog' in fine grinding?
(a) विलेय तेल/Soluble oil (c) जल/Water
(b) संश्लिष्ट विलेय तेल/Synthetic soluble oil (d) खनिज तेल/Mineral oil
31 . निम्नलिखित में ..... वह छेनी है जिसे कोने पर पदार्थ को वर्गन के लिए प्रयुक्त किया जाता है।
Which of the following chisel is used for
squaring material at the corners?
(a) चपटी छेनी/Flat chisel (c) हीरक बिंदु छेनी/Diamond point chisel
(b) जाल छेनी/Web chisel (d) तिर्यक कटाव छेनी/Cross-cut chisel
32. एक प्रवेधन बिट में छेनी कोर और कर्तन ओष्ठ के बीच का कोण ...... है। In a drill bit the angle between the chisel
edge and the cutting lip is known as
(a) जाल कोण/Web angle (c) रेकन कोण/Rake angle
(b) ओष्ठ कोण/Lip angle (d) कुंडलिनी कोण/Helix angle
33. एक डिग्री में ........ .होते है।
One degree is
(a) 60 सेकंड/seconds
(c) 100सेकंड/seconds
(b) मिनट/minutes
(d) 100 मिनट/minutes
34.अगर शंकु का आयतन 1000 /3 और व्यास 20 मिलीमीटर है, तो उसकी ऊँचाई कितनी है?
If the volume of a cone
is 1000 a /3 and the diameter is 20 mm, then the height is?
(a) 10 मिलीमीटर/mm (c) 200 मिलीलीटर/mm
(b) 20 मिलीमीटर/mm (d) 400 7 मिलीमीटर/mm
35. मशीन उपकरण के अग्रग पेंच में प्रयुक्त चूडी का प्रकार .... ...... है
The type of thread used
in lead screw of machine tools is
(a)वप्रचूडी/Buttress thread
( वी ) चूड़ी/वी Thread
(c) आरती चूडी/Sawtooth Thread
(d) समलंब चूडी/Trapezoidal thread
36. प्रथम टैप, द्वितीय टैप तथा तलीय टैप
The first tap, second
tap and bottoming tap differ in their
(a) चूडी आकार/Thread size (c) टेपर लेड/Taper lead
(b) चूडी की पिच/Thread pitch (d) चूडी के प्रकार/Type of thread
37. निम्नलिखित में से किसे एक मत्स्य पश्च फाइल कहा जाता है?
Which of the following
is known as fish back file?
(a) रिफ्लर फाइल/Riffler file
(b) मिल सॉ फाइल/Mill saw file
(c) टिंकर फाइल/Tinker's file
(d) क्रॉसिंग फाइल/Crossing file
38.चादरी धातु कार्मिक की निहाई को..कहा जाता है
A sheet metal worker's
anvil is known as
(a) खूटा/Stake (c) छेनी/Chisel
(b) हथौड़ा/Hammer (d) स्निप/Snips
39. निम्नलिखित में से उच्च निर्यात कोष्ठ में किया जाता है।
Which of the following
welding is done in high vacuum chamber?
(a) इलेक्ट्रॉन पुंज वेल्डन/Electron Beam Welding
(b) आर्क वेल्डन/Arc welding
(c) लेज़र वेल्डन/Laser welding
(d) टीआइजी वेल्डन/TIG welding
40. कर्तन कोर पर कर्तन बिंदु के शीर्ष फलक तथा सामान्य (90°) कार्य सतह के बीच का कोण......है।
Angle between the top face of cutting point
and normal (90°) to the work surface at the cutting edge
(a) रेक कोण/Rake angle (c) आनति/Inclination
(b) स्पर्श कोण/Clearance Angle (d)
बिंदु कोण/Point Angle
41. औज़ार चैटर .....के कारण होता है
Tool chatter is caused
by
(a) लघुतर स्पर्श कोण/Smaller clearance angle
(b) अत्यधिक स्पर्श कोण/Excessive clearance
angle
(c) उच्च रेकन कोण/High Rake angle (
d) लघुतर रेक कोण/Smaller rake angle
42. उच्च कार्बन इस्पातों को मशीनित करने के लिए.........युक्त औज़ारों का प्रयोग किया जाता है।
High carbon steels are
machined using tools having
(a) लघु धनात्मक रेक कोण/Small Positive rake
angle
(b) बृहत् धनात्मक रेक कोण/Large positive rake angle
(c) शून्य रेकन कोण/Zero rake angle
(d) ऋणात्मक रैक कोण/Negative rake angle
43.
44. अगर मृदु इस्पात का अभिस्तावित कर्तन वेग 20 मीटर प्रति सेकंड है, तो e20मिलीमीटर प्रवेधन बिट के लिए अपेक्षित घूर्णन वेग (rpm) कितना होगा?
If the recommended
cutting speed of mild steel is 20 m/min, what is the rotational speed (rpm)
required for a ø20 mm drill bit.
(a) 320 rpm (c) 120
(b) 1050 rpm (d) 2100 rpm
45. साक्षी निशानों के लिए प्रयुक्त प्रिक पंचित्र का कोण.....है।
The angle of the prick punch used for witness
marks is
(a) 90° (b) 60° (c) 30° (d) 100°
46. व्यावर्त प्रवेधन में कुंडलिनी कोण .... निर्धारित करता है।
Helix angle in twist
drill determines the
(a) अस्पर्शी कोण/Clearance angle
(b) रेकन कोण/Rake Angle
(c) बिंदु कोण/Point angle
(d) आनति/Inclination
47. वर्तन क्रिया के लिए अगर तर्क का वेग 128 आरपीएम है और छड़ का व्यास 25मिलीमीटर है, तो कीर्तन वेग कितना है?
For a turning operation,
if the spindle speed is 128 rpm and the diameter of the rod is 25 mm, what is
the cutting speed?
(a) 100 मीटर प्रति मिनट /m/min
(b) 10 मीटर प्रति मिनट / m/min
(c) 20 मीटर प्रति मिनट /m/min
(d) 25 मीटर प्रति मिनट /m/min
48 . टेपर वर्तन और छिद्र के लिए
For taper turning and
boring
(a) उपकरण को केंद्र से नीचे सेट किया जाना चाहिए/The tool should be set
below the centre
(b) उपकरण को केंद्र से ऊपर सेट किया जाना चाहिए/The tool should be set above the centre
(c) उपकरण को ठीक केंद्र पर सेट किया जाना चाहिए/The tool should be set exactly at the centre
(d) उपकरण को केंद्र के पास सेट किया जाना चाहिए/The tool should be set near to the centre
49. छोटी टेपर कोण वाली लंबी टेपरों के वर्तन के लिए प्रयुक्त टेपर वर्तन का तरीका, ......... है।
For turning lengthy papers with a small taper
angle, the method of taper turning employed is
(a) टेल स्टॉक अपडेट करना/offsetting the tailstock
(b) फॉर्म टूल अवनमन/form tool plunging
(c) कंपाउंडस्लाइड को घुमाना/swivelling the compound
slide
(d) लेथ क्रॉस स्लाइड और कंपाउंड स्लाइड गति का संयोजन Combination of the
lathe cross slide and the compound slide movement
rpm compared to smaller
50. समान कीर्तन वेग के लिए छोटे व्यास वाले प्रवेधनों की तुलना में बड़े व्यासवाले प्रवेधनों की आरपीएम... होगी। For the same cutting
speed larger diameter drills will have diameter drills.
(a) उच्चतर/Highe
(b) समान/Same
(c) कम/Lesser
(d) उपर्युक्त में से कोई भी नहीं/None of the above
51. एक एक्मी थ्रेड के पार्श्वों के बीच का कोण....है The angle between the flanks in an Acme thread is (a) 30°
(b) 29°
(c) 60°
(d) 51°
52. एक बाह्य सूक्ष्ममापी का न्यूनतम गणनांक 0.01 मिलीमीटर है।सूक्ष्ममापी का परास 75 से 100 मिलीमीटर तक है। बैरल पाठ्यांक 15.50 मिलीमीटर है और 10वां अंगुस्ताना अंशांकन बैरल आधार लाइन के संपात है। पाठ्यांक ... ....है
The least count of an
outside micro meter is 0.01 mm. The range of the micro meter is 75 to 100 mm.
The barrel reading is 15.50 mm and the 10th thimble graduation coincides with
the barrel datum line. The reading is
(a) . 15.60 मिलीमीटर/mm
(b) 15.06 मिलीमीटर/mm
(c) 15.50mm
(d) 15.40 मिलीमीटर
53. आरी दंत थ्रेडिंग थ्रेड का रूप ...... है
The form of thread in a
saw tooth thread is
(a)
एक पक्ष में 1 की और दूसरी पक्ष में 30° की आनति
Inclination of 1° on one side and 30° on the
other side
(b)
एक पक्ष में 3°की और दूसरी पक्ष में 30° की आनति
Inclination of 3° on one side and 30° on the
other side
(c). एक पक्ष में 5 की और दूसरी पक्ष में 60° की आनति
Inclination of 5° on one
side and 60° on the other side
(d). एक पक्ष में 3°की और दूसरी पक्ष में 29° की आनति
Inclination of 3° on one side and 29° on the other side
54. टेपर पिन रीमर में टेपर ......
The taper in a taper pin
reamer is
(a) 20 में 1/1 in 20 (c) 75 में 1/1 in 75
(b) 50 में 1/1 in 50 (d) 100 में 1/1 in 100
55. 12 मिलीमीटर व्यास के रीमर से मृदु इस्पात पर एक छिद्र बनाना है। अगर अवआमाप
0.3 मिलीमीटर और अतिआमाप 0.05 मिलीमीटर है, तो रीमिंग से पहले छिद्र प्रवेधन के लिए प्रवेधन का व्यास कितना होगा?
A hole is to be made on
mild steel with a 12 mm diameter reamer. If the under size is 0.3 mm and if the
oversize is 0.05 mm, what will be the diameter of the drill for drilling the
hole before reaming?
(a) 11.65 मिलीमीटर/mm
(b) 12.35 मिलीमीटर/mm
(c) 10.70 मिलीमीटर/mm
(d) 12.05 मिलीमीटर/mm
56. सम षट्भुज का पार्श्व 10 मिलीमीटर है। षट्भुज के समतल पृष्ठ के आरपार की दूरी क्या है?
The side of a regular
hexagon is 10 mm. What is the across flat to flat of the hexagon?
(a) 17.32
(d) 30
(c) 20
(b) 1.732
57. तप्त जल में ऐनोडित भागों को निमज्जित करने की प्रक्रिया को ........ कहते है।
The process of dipping
anodized parts in hot water is known as
(b) यशद-लेपन/Galvanizing (d) विद्युत-लेपन/Electroplating
(a) कैलोरियन/Calorising (c) सीलिंग/Sealing
58. निम्नलिखित में से कौन-सा एक कार्बनिक विलेपन का उदाहरण है।
Which of the following is an example of an
inorganic coating?
(a) तैल चित्र/Oil painting (c) सिरेमिक विलेपन/Ceramic coatings
(b) वार्निश/Varnish
(d)यशद क्रोमेट प्राइमर/Zinc chromate primer
59.पदार्थों में पराश्रव्य परीक्षण ......... निर्धारण के लिए किया जाता है।
Ultrasonic testing is
done in materials to determine
(a) सतह के नीचे की दरार/Cracks below the surface
(b) पराभव सामर्थ्य/Yield strength
(c) चरम तनन सामर्थ्य/Ultimate tensile strength
(d) कठोरता/Hardness
60. हीरक के बाद उपलब्ध सबसे कठोर टूल पदार्थ ..... है।
The hardest tool
material available next to diamond is
(a) स्टेलाइट/Stellite
(b) सिरेमिक/Ceramics
(c) सीमेंट कार्बाइड/Cemented Carbide
(d) क्यूबिक बोरोन नाइट्राइड/Cubic Boron Nitride
61. जब टूल को केंद्र से नीचे सेट किया जाए, तो
When a tool is set below
the centre, the
(a)
शिख रेक कोण में वृद्धि होती है/top rake angle increases
(b) शिख रेक कोण में कटौती होती है/top rake angle decreases
(c) शिख रेकन कोण में कोई परिवर्तन नहीं होता है/top rake angle does not
change
(d)
शिख रेक कोण ऋणात्मक हो जाती है/Top rake angle becomes negative.
62. एक गोले का पृष्ठीय क्षेत्रफल 400n mm है। इसका व्यास कितना होगा?
sphere has a surface
area of 400n mm. What is the diameter?
(a) 10 मिलीमीटर/mm (c) 5 मिलीमीटर/mm
(b) 20 मिलीमीटर/mm (d) 100 मिलीमीटर/mm
63. साधारण प्रवेधन कार्य के लिए प्रयुक्त प्रवेधन ....... काहोता है। The type of drill used for general purpose drilling work is
(a) H प्रकार/Type H (c) s प्रकार/Types
(b) N प्रकार/Type N (bf प्रकार/Type F
64. अगर एक वृत्त का केंद्र (2, 3), व्यास का एक अंत्य बिंदु (3,2) है, तो दूसरे अंत्य बिंदु का निर्देशांक .... होगा।
If centre of a circle is
(2, 3), one end point of a diameter is (3, 2), then the coordinate of the other
end point is
(a) (1,-1)
(d) (7,-8)
(c) (1,4)
(b) (-1, 1)
65. लेथ डॉग को ...... प्रयुक्त किया जाता है
A lathe dog is used for
(a)केंद्रों के बीच वर्तन के दौरान कार्य करनेके लिए/Driving the work during
turning between centres
(b) ) वर्तन के दौरान दीर्घावधि कार्यों के समर्थनके लिए/Supporting long jobs during turning
(c वर्तन के दौरान एक कर्तन उपकरण के रूप में/As a cutting tool during turning
(d).
कार्य धारणके लिए/Holding the job
66. अगर एक आइएसओ मीटरी चूडी का मुख्य व्यास 6 मिलीमीटर और पिच 1 मिलीमीटर है, तो टैप प्रवेधन का अभिस्तावित व्यास ....... होगा।
If the major diameter of an ISO metric thread
is 6 mm and the pitch is Imm the recommended tap drill diameter is
(a) 5 मिलीमीटर/mm (c) 4 मिलीमीटर/mm
(b) 6 मिलीमीटर/mm (d)7 मिलीमीटर/mm
67. ............टेपर शैंक प्रवेधन का वह भाग है जो प्रवेधन मशीन तर्क के खांचे में फिट होता है।
The part of the taper
shank drill which fits into the slot of the drilling machine spindle is called
(a) बिंदु/Point
(b) शौक/Shank
(c) Tang
(d) /Body
68. लंबाई की एसआईयूनिट ........ है।
SI unit of length
a) मिलीमीटर/Millimetre (c) मीटर/Metre
(b) किलोमीटर/Kilometre (d) सेंटीमीटर/Centimetre
69. इंजीनियर इस्पाती रूल का अल्पतमांक
Least count of an Engineer's steel rule is
(a) 1 एमएम/mm
(b) 0.5 एमएम/mm
(c) 0.1 एमएम/mm
(d)0.01 एमएम/mm
70. मृदु इस्पात का विशिष्ट घनत्व ....है
Specific gravity of mild
steel
(a) 5 (b) 2.7
(c) 7.8
(d)1
71. धातु की प्रघात और संघट्ट को सहने की क्षमता....... के कारण है।
Ability of a metal to
withstand shock and impact
(a) भंगुरता/Brittleness (c) कठोरता/Hardness
(b) चर्मलता/Toughness (d) तन्यता/Ductility
72. एक साधारण उद्देश्य वेधन बिट का बिंदु कोण .....
The point angle in a
general purpose drill bit is
(a) 108°
(b) 118
(c) 90°
(d) 60°
73. वेधन चकों को वेधन यंत्र तर्कु के जरिए फिट किए गए हैं।
Drill chucks are fitted on the drilling
machine spindle by means of
(a) बाहरी धुरा/Arbor
(b) अपवाह/Droni
(c) नर्ल्ड वलय/Knurled ring
(d) पक्षांत व चाबी/Pinion and key
74. अगर चूडी को M12 x 1.25 अभिहित किया गया है, तो 1.25...... को निर्दिष्ट करता है।
If a thread is designated as M12 x 1.25, 1.25
designates the
(a) चूडी के व्यास/Diameter of the thread
(b) चूड़ी के पिच/Pitch of the thread
(c) चूडी के कोण/Angle of the thread
(d) चूडी के पटल और जड़ के बीच की दूरी/Distance between crest
and root of the thread
75. मेटिंग पूर्वी के बीच की दूरी की जाँच करने के लिए प्रयुक्त उपकरण .... है।
The instrument used to
check the gap between mating parts
(a) त्रिज्या गेज/Radius
gauge (c) फिलर गेज/Fillet
gauge
(b) संस्पर्श गेज/Feeler gauge (d) वेधन गेज/Drill gauge
76. कर्तन के दौरान पदार्थ के ऊपर कर्तन कोर के चलने के वेग को ..........कहा जाता है।
The speed at which the
cutting edge passes over the material while cutting is known as
(a) कार्बन वेग/Cutting speed
(b) भरण दर/Feed rate
(c) घूर्णन वेग/Rotational speed
(d) मशीन वेग/Machine speed
77. पहले से परिवेधित छिद्रों को बहु बिंदु कर्तन उपकरण के द्वारा यथार्थ आकार में बढ़ाने और परिष्कृत करने की प्रक्रिया...........है।
The process of enlarging
and finishing previously drilled holes to accurate sizes using a multipoint
cutting tool is
(a) संछिद्रण/Boring
(b) परी संछिद्रण/Counter boring
(c) निकास (टैपिंग/Tapping
(d) छिद्रवर्धन/Reaming
78. मैट्रिक थ्रेड थ्रेड कोण ...है।
The thread angle of a metric thread is
(a) 90°
(b) 60°
(c)30°
(d) 120°
79. बाह्य चूड़ी के कर्तन के लिए प्रयुक्त उपकरण को......कहा जाता है।
The tool used to cut external threads is known
as
(a) टैप/Tap
(b) डे/Die
(c) वेधन बिट/Drill bit
(d) परिछिद्रक/Reamer
80. एक हस्त टैप के शैंक में तीन वलय अंकित है। तो वह एक ........ है।
The shank of a hand tap has three rings marked
on. Then it is a
(a) प्रथम टैप/First Tap (c) टेपर टैप/Taper Tap
(b) अधस्तली टैप/Bottoming Tap (d) मध्यवर्ती टैप/Intermediate Tap
ANSWER KEY
1. A 2.D 3.B 4.B 5.A 6.A 7.A 8.C 9.C 10.A 11.D 12.A 13.B 14.D 15.D 16.C 17.A 18.D 19.C 20.C 21.A 22.B 23.B 24.C 25.C 26.C 27.B 28.D 29.C 30.B 31.C 32.A 33.B 34.A 35.D 36.C 37.D 38.A 39.A 40.A 41.B 42.D 43.A 44.A 45.B 46.B 47.B 48.C 49.A 50.C 51.B 52.A 53.B 54.B 55.A 56.A 57.C 58.C 59.A 60.D 61.C 62.A 63.B 64.C 65.A 66.A 67.C 68.C 69.B 70.C 71.D 72.B 73.A 74.B 75.B 76.A 77.D 78.B 79.B 80.B
Comments
Post a Comment