Skip to main content

TYPES OF FILE

File is used for removing excess material and they are made of High carbon steel.
Files are many types according there Grade, cut and shape.

According to Grade - five types of file 
  1. Rough file
  2.  Bastard file
  3.  Second cut file
  4.  smooth file and
  5.  Dead smooth file 
According to cut - four types 
  1. Single cut file
  2. Double cut file
  3. Rasp cut file
  4. Curved file
According to Shape - seven types 
  1. Flat file 
  2. Hand file 
  3. Round file
  4. Half round file 
  5. Square file 
  6. Triangular file
  7. Knife edge file

Comments

Post a Comment

Popular posts from this blog

TYPES OF GEAR AND THEIR USES

                               GEAR Purpose of gears - Gears are used to transmit torque or motion from the driving shaft to the driven shaft 1) To change the direction of rotation. 2) To change the velocity ratio. 3) To get positive drive. Types of gear    Gears are many types are below                                                BEVEL GEAR -   1) The teeth are cut parallel to the axis of rotation. 2) Transmit power between two shaft. Uses - in Electric screwdriver, Clock, Washing machine, Motorcycle etc. ADVANTAGES-  1) simple in construction 2) Easy to manufacture DISADVANTAGE-  1) center distance is limited. 2) Noise at high speed.                             ...

Types of Vices, Bench Vice, Machine Vice, Pipe Vice, Hand Vice, Leg Vice, Pin Vice,Tool Maker Vice.

Vice     A bench vice is made of - cast iron or cast steel and it is used to hold work for filing, sawing, threading   etc.    Parts of a bench vice - Sl. Name of parts Material i Fixed Jaw          Grey cast iron ii Movable jaw Grey cast iron iii Jaw plates Tool steel iv Spindle Mild steel v Handle Mild steel vi Box Nut Phosphorous Bronze   The size of vice indicated by the – width of the jaw. Vice Clamps or soft jaw is made of – Aluminium. The vice clamps are used to – Protect the finish surfaces of the job. A bench vice is fixed at at a height of – Elbow Position . A bench vice is fixed at at a height of – 106 cm . The bench vice is called as Parallel jaw vice because – It’s...

ISRO PREVIOUS YEAR PAPER, TECHNICIAN-B (FITTER)

ISRO PREVIOUS YEAR PAPER TECHNICIAN-B (FITTER)  ISRO SATELLITE CENTER, BENGALURU Held on 20.11.2016 1 . Which is not the part of file – a) Sholder b) Heel   c) Ferrul   d) Barrel 2 .The file used for filing leather is – a) Single cut file b) Double cut file c) Rasp cut d) Curved cut 3. One micron = a) 0.001 b) 0.0001 c) 0.01 d) 0.00001 4 . What is the point angle of prick punch which is used for making light punch marks   - a)       45° b) 100° c) 75° d)30 ° 5.   The engineer’s hammer is specified by its – a) Volume b) Length of handle c) Weight d) Material 6. If the strength of material to be drilled is high the drill speed should be – a) High b) Low c) Speed will not depend on strength   d) none of these 7. Calculate the spindle RPM for drilling speed of 44 m/min and diameter of drill 20mm – a) 350 b) 1400 c) 500 d) 700 8. What is the coolant used for machining cast iron – a) Soluble oil b) Chemi...